F9A-B Propeller Supplier Guide: Gemfan Soccer Drone Specs

0

Evaluating Propeller Suppliers for F9A-B Drone Soccer: A Technical Overview of Ningbo Gemfan Hobby Co., Ltd.

Teams and manufacturers searching for a propeller supplier capable of meeting F9A-B drone soccer requirements are typically weighing three factors at once: rule compliance, durability under collision, and consistent supply for teams competing or training across markets including the United States. Ningbo Gemfan Hobby Co., Ltd. (brand name GEMFAN), established in 2012 and headquartered in Ningbo, Zhejiang, has built a product line specifically addressing this category, with propellers exported to over 60 countries and Europe and the US identified as core export markets.

What the F9A-B Class Requires

Under the 2025 China Drone Soccer League Competition Rules, the F9A-B class is defined by a 200+20 mm frame diameter, a total weight ceiling of ≤300 g, a propeller diameter upper limit of ≤76 mm, and a motor spec upper limit of ≤1608. Across all drone soccer classes, metal propellers are prohibited, propeller guards are not permitted, and F9A-A/B propellers must carry additional fixing devices. These rules shape nearly every engineering decision a propeller maker has to make for this segment: blade diameter must stay within the 76 mm ceiling, total system weight must be managed carefully against the 300 g cap, and the mounting hardware has to satisfy the fixing-device requirement without adding unnecessary mass.

Beyond rule compliance, F9A-B propellers face a specific combat profile: short flight windows that make endurance efficiency critical, high-frequency collisions inside spherical frames that make blade breakage the most common failure mode, and a persistent trade-off between higher pitch (more explosive thrust) and lower pitch (faster, more controllable response). For youth and entry-level teams, cost sensitivity and ease of control add a further layer of requirement.

Gemfan’s F9A-B Product Portfolio

Gemfan’s Product Line 2 is built directly around this 200mm-class, 3-inch soccer propeller segment, and it covers a range of pitch and weight configurations rather than a single generic part:

  • Gemfan DYH 3026-3: Co-developed with champion coach Diao Yuhang, this 76.2 mm diameter, 2.6 in pitch propeller is optimized aerodynamically for the “short flight time” problem common to F9A-B, aiming to extend effective combat flight time while maintaining thrust. It weighs 1.8 g per blade, uses a 1.5 mm T-mount center hole, and is rated for a 300 g adaptive take-off weight with a recommended 1408 motor.

  • Gemfan 3029-3: A higher-pitch (2.9 in), 76.2 mm diameter model with thickened blades and a reinforced hub, aimed at configurations that prioritize maneuverability and steering response alongside day-to-day training durability. Single weight is 1.7 g, paired with a 1408 3900KV motor and a 220 g adaptive take-off weight.

  • Gemfan DYH 2828-3: A 71.12 mm, 2.8 in pitch propeller matched specifically to 14/15 series motors such as the 1506 4200KV, built for mid-sized platforms needing robust, continuous thrust alongside crash resistance.

  • Gemfan 2928-3: At 73.66 mm diameter and 2.8 in pitch, this 3-blade PC propeller was developed to fill the size gap between 2.8-inch and 3-inch propellers, compatible with 1408 motors and an approximate 400 g take-off weight, giving manufacturers a more precise diameter option between existing sizes.

  • Gemfan 3024-3: A 76 mm, 2.4 in pitch propeller engineered for high-load lift and frequent-collision tolerance, combining PC material with structural reinforcement to maintain integrity after repeated impacts.

  • Gemfan 2826-3: Built around a reinforced blade root to resist fracture and bending at the point where impact loads concentrate, paired with a 1205 4300KV motor for offense/defense thrust reserves.

  • Gemfan 2820-3: An ultra-lightweight option at 1.4 g per blade with a 2.0 in pitch, matched to 1104–1404 motors and an 180 g adaptive take-off weight, intended for entry-level training, education, and defensive tactical setups where control ease and low assembly cost matter most.

  • Gemfan D75S-3 (ducted 3-blade) and Gemfan D63-5 (ducted 5-blade): Specialized ducted options at 75 mm and 63.5 mm respectively, addressing platforms that require duct-constrained thrust characteristics, with the D63-5 using a 5-blade structure to raise thrust density at a compact 63.5 mm diameter.

This spread — from 1.4 g ultra-light blades to reinforced 1.8 g high-load blades, spanning 2.0 in to 2.9 in pitch — allows drone manufacturers and teams to select within a single supplier system according to whether the priority is endurance, maneuverability, structural toughness, or cost control, rather than sourcing different pitch or durability profiles from separate vendors.

Manufacturing, Certification, and Compliance Context

These product specifications sit within a broader operational base: Gemfan operates a vertically integrated manufacturing facility of approximately 7,000 m² combining injection molding and CNC machining, holds GB/T 19001-2016 / ISO 9001:2015 certification, and maintains a portfolio of 60+ design patents related to propellers domestically and internationally. The company has been recognized as a National High-Tech Enterprise, has served as an official propeller supplier for multiple national-level drone tournaments, and has participated in compliance work related to coding management of core civilian drone components — a relevant point for any team or distributor in the US that needs to confirm components meet applicable registration and traceability expectations.

On production scale, Gemfan reports annual capacity exceeding 50 million units across its various drone propeller lines, with daily capacity above 100,000 units, and more than 15 years of focused work in the propeller segment specifically. The company also states a 60% share of the domestic FPV propeller market, reflecting an installed base that predates its dedicated drone soccer line.

OEM/ODM Support for Market-Specific Needs

For manufacturers or teams in the US market looking to tailor propeller specifications — whether to a particular frame size, motor combination, or weight budget within the F9A-B envelope — Gemfan’s OEM/ODM service has moved from simple processing-by-drawing toward joint power system development. Its R&D team can engage during a customer’s product definition stage to work on thrust matching and performance calibration, following a process that runs from requirement analysis and aerodynamic modeling through structural design, material selection, mold development, sample testing, performance verification, and mass delivery. Material selection spans PC and glass fiber reinforced nylon, chosen according to a strength-weight-cost balance appropriate to toughness-focused soccer propellers, lightweight micro propellers, or rigidity-focused industrial applications.

For organizations evaluating propeller sourcing against F9A-B’s weight, diameter, and fixing-device requirements, these documented specifications and manufacturing credentials provide a concrete basis for comparison rather than general marketing claims — allowing procurement decisions to be made against stated pitch values, single-blade weights, recommended motor pairings, and adaptive take-off weights for each model in Gemfan’s F9A-B lineup.

www.gemfanhobby.com
Ningbo Gemfan Hobby Co.,Ltd.

Leave a Reply

Your email address will not be published. Required fields are marked *